Outdoor Fountains: The Perfect Decor Accessory to Find Peace
Outdoor Fountains: The Perfect Decor Accessory to Find Peace
Setting Up and Maintaining Fountains
Setting Up and Maintaining Fountains A very important first step is to think about the proportions of the outdoor wall fountain with regards to the area you have available for it. It is essential that the wall where you are going to put it is sturdy enough to support its weight. So spaces or walls which are smaller will most probably require something light. In order to run the fountain, an electric powered socket will need to be nearby. There are many different types of fountains, each with their own set of simple, step-by-step instructions.
The typical outdoor wall fountain is available in an easy-to-use kit that comes with everything you need and more to properly install it. The kit will contain a submersible pump, the hoses and basin (or reservoir). The basin, if it's not too big, can easily be hiddenin your garden among the plants. Once your wall fountain is installed, all that is needed is regular cleaning and some light maintenance.
Replenish and clean the water on a regular basis. Remember to remove debris like leaves, twigs or dirt as swiftly as possible. In addition, your outdoor wall fountain should not be exposed to freezing winter weather. Your pump may break when subjected to freezing water during the wintertime, so it is best to bring it indoors to prevent any damage. Simply put, your outdoor fountain will be a part of your life for many years with the proper care and maintenance.
The One Cleaning Solution to NEVER Use On Your Garden Water fountains

Experts suggest that the typical garden fountain undergoes a thorough scouring every 3-4 months. Before cleaning, all the water must be taken out. Then use a soft towel and gentle cleanser to scrub the inside. Feel free to use a toothbrush if needed for any stubborn crevasses. Any soap residue left on your fountain can harm it, so be sure it is all rinsed off.
Numerous organisms and calcium deposits may get inside the pump, so it is best to take it apart and clean it completely. Letting it soak in vinegar for a couple of hours first will make it much easier to clean. If you want to eliminate build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that will stick to the inside of the pump.
And finally, make sure the water level is consistently full in order to keep your fountain running optimally. Low water levels can damage the pump - and you don't want that!