Ancient Crete & The Minoans: Wall Fountains
Ancient Crete & The Minoans: Wall Fountains Archaeological digs in Minoan Crete in Greece have revealed some kinds of channels. In conjunction with supplying water, they spread out water which accumulated from deluges or waste. Most were created from clay or rock. When terracotta was chosen, it was usually for waterways as well as pipes which came in rectangular or circular forms. Among these were terracotta pipes which were U-shaped or a shortened, cone-like shape which have only appeared in Minoan civilization. The water supply at Knossos Palace was handled with a strategy of clay piping which was put beneath the floor, at depths going from a couple of centimeters to many meters. The terracotta water pipes were also made use of for accumulating and saving water. Hence, these piping had to be ready to: Subterranean Water Transportation: It’s not quite known why the Minoans needed to transfer water without it being spotted. Quality Water Transportation: Many scholars believe that these water lines were employed to develop a different distribution process for the palace.Discover Serenity with Outdoor Water Features

Keeping Your Outdoor Wall Fountain Clean
Keeping Your Outdoor Wall Fountain Clean Water fountains will keep working a very long time with scheduled cleaning and maintenance. A common problem with fountains is that they tend to gather dirt and debris, so it is essential that you keep it free from this. On top of that, algae can be a concern, as sunshine hitting the water allows it to form quickly. Either sea salt, hydrogen peroxide, or vinegar can be blended into the water to eliminate this issue. There are those who like to use bleach, but that is dangerous to any animals that might drink or bathe in the water - so should therefore be avoided.A thorough cleaning every 3-4 months is recommended for garden fountains. The first task is to get rid of all of the water. As soon as it is empty, scrub inside the reservoir with a gentle cleanser. If there are any tiny grooves, grab a toothbrush to get each and every spot. Any soap residue remaining on your fountain can damage it, so be sure it is all rinsed off.
Calcium and fresh water organisms could get inside the pump, so you should disassemble it to get it truly clean. To make it less difficult, soak it in vinegar for several hours before cleaning. If you want to remove build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any elements that might stick to the inside of the pump.
Finally, be sure to have a quick look at your fountain every day and add water if you see that the level is too low. If the water level falls below the pump’s intake level, it can damage the pump and cause it to burn out - something you do not want to happen!